My Store

Performax Type Ready-To-Cut Ready-To-Wrap Drum Sander Sandpaper Rolls 3 Inch by 35 Feet Long for Jet 16-32 Drum Sander Paper, Aluminum Oxide Sandpaper - 80 Grit

$37.19 USD

~~$0.00 USD~~ $37.19 USD

Sale Sold out

Style 080 Grit

Quantity

Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 1632 drum sander and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!
The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grit and 220 grit drum sander wraps, we recommend using those higher grits for finishing passes only.
The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive wraps, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.
Straight feed? How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. Just a slight angle provides you with more effective stock removal. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.
When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the piece is being fed through the drum sander. Once the down is gone, flip the stock over and sand the other side. As always, take extreme care and caution when sanding boards that are bowed, twisted or otherwise imperfect.

Product Description

Replace Your Old, Worn Out Drum Sander Paper

With these high quality, ready-to-cut and ready-to-wrap rolls, you'll be back up and running and producing professional level results in no time! Made from high quality materials right here in the United States so you know you're getting a high quality product with each abrasive roll!

Follow the Instructions Above

Cutting the end for quick installation on your jet 1632 drum sander couldn't get much simpler. Simply follow the instructions above and you'll be ready to wrap your roll in no time at all...

Clip, Wrap and Clip!

Once the drum sander sandpaper roll is cut and ready for install, simply clip in one end, wrap the roll around the drum and clip it into the other end. Make sure its tight with no loose areas and you're ready to "roll"!

Jet Drum Sander 16-32 Sandpaper

These rolls work with the industry standard Performax, Jet Drum Sander 16-32.

High Grits for Finishing

Use the higher grits like 150 and 220 to finish projects like cutting boards and butcher blocks. Use the medium grits like 80 and 100 grits to help shape and plane wood when needed.